This command creates planes perpendicular to the current construction planes. I tried the section command but it just projects n intersection of geometry on a surface.

Select the objects that the cutting planes will pass through and press Enter. Pick the end of a line that defines the cutting plane.

The horizontal planes are Top, Cut Plane, and Bottom.

This can be done by defining a point on the curve or one could use a cutting line. Every plan view has a property called View Range, also known as a visible range. Tutorials‎ > ‎Rhino Make 2D: diagramming in Rhino & Illustrator‎ > ‎ ... Plan cuts are normally 4’-0” above the floor. press Enter to stop making cut planes..

Options Direction (first cut) X/Y/Z Constrains the direction for the wire curve extrusion to world x, y, or z. NormalToCurve Constrains the direction for the wire curve extrusion to the curve plane normal. Steps. ... To generate a plan or section cut locate the clipping plane. Select the part to cut away. 3. However a …

Select the plane and the objects you would like to cut through and use the “Intersect” command to create your. A CPlane (construction plane) is simply an imaginary plane that you do your drawing on. Well you can, and we have the solution! ; Pick the start of a line that defines the cutting plane. The prompts repeat to make several cut planes. Click the button in the value column. This command creates planes perpendicular to the current construction planes. Since the monitor/screen is two-dimensional, it's easy to tell Rhino the x,y-coordinate of something you're drawing, but the z value is not possible to know so a construction plane is referenced and the z value is on the plane. Sie wird Ihnen auch zur Erstellung von Skripten nützlich sein. On the Properties palette, under Extents, find the Depth Clipping parameter. Die Befehlsliste wird Ihnen helfen, Rhino besser kennenzulernen. CPlaneNormal

I keep getting the message that the cut axis is … Often times you can compliment some of the “lost” geometry by the intersect-command which sometimes will help. One way of doing it is to use a clipping plane, then make2d and then sometimes you get what you seek. to cut through the object. ; Pick the end of a line that defines the cutting plane.

Damit ein Skript in allen Rhino-Versionen funktioniert, schreiben Sie ihn auf Englisch und fügen Sie einen Unterstrich (_) vor alle Befehlsnamen und –optionen hinzu.
It would be great to cut using the z-axis.

Is there a way to have a section view… By this i mean a plane that hides whats on one side and leaves visible whats on the other? The view range is a set of horizontal planes that control object visibility and display in the view. The prompts repeat to make several cut planes.

press Enter to stop making cut planes.

This surface may be larger than the trim curves, but you will not see the underlying surface because Rhino does not draw the part of the surface that is outside the trim curves. Wouldn't it be awesome if you could take a PDF floor plan and convert it precisely to scale at the click of a button.

Trimming curves lie on the underlying surface. The Depth Clipping parameter is available for plan and site views. If you want to cut a curve in separate parts you will have to define the point where the curve has to be cut. Read on how to import reference drawings into Rhino and resize them accurately to convert it to the correct scale.